Before the hydraulic system oil becomes hot, do not operate the hydraulic system, otherwise the hydraulic components will be damaged, and the pump will explode. The forklift is on the move
To control the speed, maintain the distance, avoid emergency braking, the braking interval in the cold season is about 2 times longer than usual. Do not turn sharply, reduce turning
When the impact force to prevent the rigid structural parts from breaking.
To do a good job of seasonal maintenance of equipment, detect the freezing point of antifreeze, so that it is lower than the local minimum temperature 5C; Turn the thermostat on at 82C left
Right; The density of battery electrolyte was increased to 1.280g/cm3; Timely adjust the oil of each part of the machine, and install insulation measures for field work equipment
If necessary, install the engine oil preheating device, and start the engine regularly to preheat the working system of each department.
After the normal start of the engine, there should be enough warm up time to make it run at low speed and light load until the engine, transmission, hydraulic system and final transmission
The moving oil gets hot. When the equipment is working, the operation of the bucket, shovel and various devices should be slow, and the large throttle impact, scraping, shoveling and pushing are prohibited
"Steady" and "slow" are required. Winter is the highest accident season, accounting for about 80% of the total accidents of the year, and winter accidents caused by operational errors up to 65%
Up. If the temperature is lower than -15 ° C, the engine cannot work immediately after starting, but the engine should run at 1000-1100r/min 10-
15min with transmission in neutral. Therefore, it is necessary to regularly check the rigid connection and the main load-bearing parts of the forklift machine.
