China Qingdao Yangft Intelligent Equipment Co., Ltd. Company Cases

Before the hydraulic system oil becomes hot, do not operate the hydraulic system, otherwise the hydraulic components will be damaged, and the pump will explode. The forklift is on the move To control the speed, maintain the distance, avoid emergency braking, the braking interval in the cold season is about 2 times longer than usual. Do not turn sharply, reduce turning When the impact force to prevent the rigid structural parts from breaking. To do a good job of seasonal maintenance of equipment, detect the freezing point of antifreeze, so that it is lower than the local minimum temperature 5C; Turn the thermostat on at 82C left Right; The density of battery electrolyte was increased to 1.280g/cm3; Timely adjust the oil of each part of the machine, and install insulation measures for field work equipment If necessary, install the engine oil preheating device, and start the engine regularly to preheat the working system of each department. After the normal start of the engine, there should be enough warm up time to make it run at low speed and light load until the engine, transmission, hydraulic system and final transmission The moving oil gets hot. When the equipment is working, the operation of the bucket, shovel and various devices should be slow, and the large throttle impact, scraping, shoveling and pushing are prohibited "Steady" and "slow" are required. Winter is the highest accident season, accounting for about 80% of the total accidents of the year, and winter accidents caused by operational errors up to 65% Up. If the temperature is lower than -15 ° C, the engine cannot work immediately after starting, but the engine should run at 1000-1100r/min 10- 15min with transmission in neutral. Therefore, it is necessary to regularly check the rigid connection and the main load-bearing parts of the forklift machine.  

Heavy steering means that when the forklift is driving at low speed, the steering is heavy or stuck when the forklift is slowly turning. The reasons leading to this abnormal phenomenon are as follows:   1. The forklift hydraulic tank is short of oil or the oil filter is clogged 2. There is air in the forklift oil circuit 3. Hydraulic pump wear causes leakage, or the drive belt slips 4. The relief valve leaks, the spring is too soft or improperly adjusted 5. The steering cylinder or distribution valve seal is damaged 6. The oil pipe joint or sealing ring is damaged  

Narrow Asile Forklift, the newest addition to the yangft product line. This groundbreaking forklift is designed to navigate narrow spaces, making it the perfect solution for modern warehouse operations. With its compact size, the Narrow Asile Forklift can easily maneuver around tight corners and fit seamlessly into even the smallest of aisles. This ensures greater productivity and efficiency in the workplace, leading to an overall increase in profitability. As a company that is committed to innovation and progress, YangFT is proud to introduce this cutting-edge technology to the market. The Narrow Asile Forklift represents a new era in warehousing, ushering in a time of unprecedented efficiency and precision. We are confident that this product will revolutionize the industry and set a new standard for excellence. With the launch of the Narrow Asile Forklift, YangFT is demonstrating its ongoing commitment to meeting the evolving needs of our customers. We understand that in today's fast-paced business environment, every second counts. Our goal is to help our clients streamline their warehouse operations and optimize their resources, so they can stay ahead of the competition. In conclusion, the Narrow Asile Forklift is a game-changing product that will make a huge difference in the way warehouses operate. We are excited to bring this innovative technology to market and look forward to seeing the positive impact it will have on our customers' businesses. At YangFT we strive to be pioneers in our field, and the Narrow Asile Forklift is just the beginning of what we hope to achieve.